M3 Drive Mounter 2 2
iBoysoft Drive Manager 2.6
Includes screws for mounting factory glock adapter plates, cover plate, and trijicon rmr to adapter plate #2/#6 (1) pair 6-32 x.385' rmr mounting screws (t-15 torx plus drive) (1) pair m3 x 0.5 x 8mm mos cover plate screws (t-10 torx plus drive) (1) pair m3 x 0.5 x 6mm mos adapter plate screws (t-10 torx plus drive).
- 2.5 Hard Drive HDD SSD Mounting Screws For Dell Latitude HP Laptop Computer 100x. 8 HP Hard Drive Mounting Screws 6000 6005 Pro 8000 8100 8200 Elite DC7800 DC7900. Lot of 16 HP Blue Hard Drive Mounting Screws EliteDesk 705 800 ProDesk 400 600.
- Sabrent 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Kit (BK-HDDH) Color: Black Conversion Tray: 2 x 2.5' Drive to 3.5' Bay Compatible Products: 3.5' Specifications: Supports any computer cases with an available 3.5' drive bay (both screw-on type or tool-less type) Converts an available 3.5' HDD bay drive to accommodate two 2.5' HDD or SSD (Solid State Drive).
- QUEENTI 2.5' SFF SAS SATA SSD Hard Drive Carrier Tray Caddy 651687-001 651699-001 for HP Proliant ML350 DL360p DL380P DL160 Gen8 G8 Gen9 G9 with 4 Mounting Screws and Screw Driver 4.3 out of 5 stars 38.
- The M3 half-track was an American armored personnel carrier half-track widely used by the Allies during World War II and in the Cold War.Derived from the M2 half-track car, the M3 was extensively produced, with about 15,000 standard M3s and more than 38,000 variant units manufactured. The M3 was extensively modified with several dozen variant designs produced.
M3 Drive Mounter allows you to mount, unmount, or eject network drive or external drive with only one click.
- Connect your network drives only once, set it and forget it
- Automatically detect network drives and connect them
- Mount file share (FTP, SFTP) server storage as a local disk in the Finder, open remote files with any application and work like on a local volume.
- Safely and automatically eject all external drives when your Mac sleeps
- Automatically disconnect network drives on sleep and connect them on wake from sleep.Get notified when a volume becomes available or an external device can be unplugged safely.
- One click to disconnect all network drives or unmount all external drives.
Tips: When manually adding network drive, just need to enter server address, for example: smb://192.168.1.2
WHAT’S NEW
Version 2.6
- fixed some bug.
M3 Drive Mounter 2 2010
M3 Drive Mounter 2 2.0
- Title: iBoysoft Drive Manager 2.6
- Developer: Sichuan Hengxintong Software Co. Ltd. © 2017 M3 Data Recovery
- Compatibility: OS X 10.6 or later, 64-bit processor
- Language: English
- Includes: Pre-K'ed
- Size: 5.45 MB
- View in Mac App Store
NitroFlare:
M3 Drive Mounter 2 2018
Reference section at top, comments (live action) at bottom.
*******
Page 29 (960,162 bytes)
https://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.12/100529369b.pdf
Use only 6-32 UNC mounting screws.
The screws should be inserted no more than 0.150 inch (3.81 mm)
into the bottom or side mounting holes.
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
https://en.wikipedia.org/wiki/Computer_case_screws
'The #6-32 UNC screws are often found on hard disk drives
and the case's body to secure the covers.
The M3 threaded holes are often found on optical disc drives
and floppy drives.
Motherboards and other circuit boards often use a #6-32 UNC standoff.
#4-40 UNC thumb screws are often found on the ends of
DVI, VGA, and older Serial and Parallel cables.'
https://en.wikipedia.org/wiki/Computer_case_screws#.236-32_UNC_screw
a major thread diameter of #6 which is defined as 0.1380 inches (3.51 mm)
and 32 tpi (threads per inch) which equates to
a thread pitch of 0.031250 inches (0.7938 mm)
It commonly appears in lengths of 3/16 inch, 1/4 inch, or less often 5/16.
*********************
OK, so I dug out a few samples.
The PCI slot cover is 6-32, with the threaded section being 1/4' worth
of threads, and the hex sided head with Philips drive bringing it
up to about 3/8' long.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:Cross_slot_screw.jpg
The disk drive screw on the other hand, was 6-32, but the total
length of the screw was 1/4', and the head is flat. That's the
pan head.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:PCscrew6-32-large.jpg
The optical drive screw has a finer pitch and is 1/4' long for the
whole thing. That's probably the M3 one. For the optical drive
screw, we can use this picture (bottom). Now, this picture isn't
entirely correct - the bottom screw has the right pitch, but
it needs the pan head on it to be the optical drive screw.
Drive screws have the flat head (like the picture above)
so there is no chance of the screw snagging on the rails
as it slides into stuff. The screw on the optical drive
doesn't fit the hard drive. But the screw holding a PCI
slot cover, fit into the hard drive, even if it is too long.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:M3_screw_and_6-32_UTS_screw_with_ruler_thread_pitch.png
This references shows the shapes by name. The one on the left,
the 'pan', is the head shape for both HDD and ODD. This is
from the Wikipedia article entitled 'Screw'.
https://en.wikipedia.org/wiki/Screw#/media/File:Screw_head_types.svg
(a) pan, (b) dome (button), (c) round, (d) truss (mushroom),
(e) flat (countersunk), (f) oval (raised head)
HTH,
Paul
*******
Page 29 (960,162 bytes)
https://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.12/100529369b.pdf
Use only 6-32 UNC mounting screws.
The screws should be inserted no more than 0.150 inch (3.81 mm)
into the bottom or side mounting holes.
Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
https://en.wikipedia.org/wiki/Computer_case_screws
'The #6-32 UNC screws are often found on hard disk drives
and the case's body to secure the covers.
The M3 threaded holes are often found on optical disc drives
and floppy drives.
Motherboards and other circuit boards often use a #6-32 UNC standoff.
#4-40 UNC thumb screws are often found on the ends of
DVI, VGA, and older Serial and Parallel cables.'
https://en.wikipedia.org/wiki/Computer_case_screws#.236-32_UNC_screw
a major thread diameter of #6 which is defined as 0.1380 inches (3.51 mm)
and 32 tpi (threads per inch) which equates to
a thread pitch of 0.031250 inches (0.7938 mm)
It commonly appears in lengths of 3/16 inch, 1/4 inch, or less often 5/16.
*********************
OK, so I dug out a few samples.
The PCI slot cover is 6-32, with the threaded section being 1/4' worth
of threads, and the hex sided head with Philips drive bringing it
up to about 3/8' long.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:Cross_slot_screw.jpg
The disk drive screw on the other hand, was 6-32, but the total
length of the screw was 1/4', and the head is flat. That's the
pan head.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:PCscrew6-32-large.jpg
The optical drive screw has a finer pitch and is 1/4' long for the
whole thing. That's probably the M3 one. For the optical drive
screw, we can use this picture (bottom). Now, this picture isn't
entirely correct - the bottom screw has the right pitch, but
it needs the pan head on it to be the optical drive screw.
Drive screws have the flat head (like the picture above)
so there is no chance of the screw snagging on the rails
as it slides into stuff. The screw on the optical drive
doesn't fit the hard drive. But the screw holding a PCI
slot cover, fit into the hard drive, even if it is too long.
https://en.wikipedia.org/wiki/Computer_case_screws#/media/File:M3_screw_and_6-32_UTS_screw_with_ruler_thread_pitch.png
This references shows the shapes by name. The one on the left,
the 'pan', is the head shape for both HDD and ODD. This is
from the Wikipedia article entitled 'Screw'.
https://en.wikipedia.org/wiki/Screw#/media/File:Screw_head_types.svg
(a) pan, (b) dome (button), (c) round, (d) truss (mushroom),
(e) flat (countersunk), (f) oval (raised head)
HTH,
Paul